Industrial gear oils (Meropa) extreme pressure industrial gear oil Product Overview high performance, heavy-duty extreme pressure industrial gear oil. The use of parathion additive systems, and rust inhibitors, antioxidants and metal deactivators recipe from. It can be widely used for heavy loads and shock loading conditions in the lubrication of industrial gears. Features l improve the thermal stability of high efficiency gear set extreme pressure (EP) additive system clean gear and bearing friction surfaces clean, greatly reducing friction surface sediments, ensuring effective lubrication of gears and bearings. High oxidation stability, so that the oil is not easy with a thickened, thereby reducing energy losses. l extend equipment life very effective extreme pressure additive system that metal to metal contact surface of an effective protective film, greatly reducing wear and improve the power transmission efficiency. Good water separation characteristics and strong rust resistance, the metal surface to prevent rust and corrosion. Moreover, the thermal stability additive system is very good, to further reduce bearing materials have generated high temperature corrosive compounds. Effective anti-corrosion additive and the metal parts to give extra protection. l Long life is very effective antioxidant and copper deactivators Caltex gear oil 680, greatly slowing the oxidation process to control the course of the viscosity tends to increase, and has a long service life. Caltex industrial gear oil gear oil Caltex Caltex Meropa 68,100,150 320,220,320,460 quality, high performance, low extreme pressure (EP) industrial gear lubricants. This product contains special sulfur - phosphorus additives, also with rust inhibitors, antioxidants and metal deactivators. It can be widely used for lubrication under heavy load and impact load work under a variety of industrial gears. Obtain ANSI / AGMA 9005-D94 [EP] (viscosity level 68-320), US Steel (US Steel) 224 (viscosity level 68-320) Caltex gear oil 1000, David Brown Table E (viscosity level 68-680) and DIN 51517 Part 3 (viscosity level 68-680) approved. Caltex synthetic industrial gear oil Caltex Pinnacle EP EP) ISO Level: 68; 100; 150; 220; 320; 460 high-quality, high performance, extreme pressure (EP) gear lubricants and synthetic circulating oils. It can be widely used in harsh conditions, when using conventional lubricant drain intervals short, such as overloading and / or shock load and high temperature lubrication of various industrial equipment. Performance and anti-wear properties of the product is chosen a- olefin polymer, synthetic ester base fluid and high performance additives carefully deployment Caltex gear oil, so this product has excellent extreme pressure (EP), high thermal stability / oxidation stability and good ability to rust and corrosion. Obtain ANSI / AGMA 9005-D94 synthetic gear lubricants, David Brown Table H and the American Iron and Steel (US Steel) approved 224. Caltex synthetic industrial gear oil Caltex Synlube CLP quality, high performance, polypropylene glycol based synthetic industrial gear lubricants, especially for the occasion exceptionally poor operating environment. This product is low foaming tendency, contains antioxidants, anti-rust agents and special anti-wear, anti-extreme pressure additives. The main performance criteria include the German standard DIN 51517 Part 3 CLP, David Brown Table G Approved (industrial enclosed gear units) and circulate a lubricant SKF paper machine drying section and the like. Caltex gear oil 460, Suzhou Caltex gear oils, industrial gear oil is supplied by Shenzhen Lubricant Co. 华盛邦. Shenzhen 华盛邦 Lubricant Co. (www.hsb-123.com/)(www.hsb-123.com) strong, credible, in Shenzhen, Guangdong lubricant (grease) and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Huasheng Bang lubricant into the brilliant and you work for a better future!