Aluminum-magnesium cutting oil (Almag Oil) low viscosity, non-active cutting oil product summary transparent, light-colored, low viscosity, straight cutting oil mineral oil distillates. Especially suitable for aluminum and aluminum alloys, magnesium and magnesium alloys Grinding and light machining. Features l Excellent machining characteristics of low viscosity, Caltex hydraulic oil HDZ68, reflux fast, not only can quickly wet the metal surface, but also to quickly penetrate into the cutting area. Excellent cooling properties, good heat transfer performance, can effectively prevent the loss of tool hardness and impact deformation of the workpiece machining accuracy. This product is light in color, high transparency, can more clearly see the tool and the workpiece. l will not leave a stain on the work of highly refined base oils may contain active additive chemical reaction with the metal, so, whether the processing of ferrous or non-ferrous metals, the use of this product will not leave stains on the workpiece. l extend tool life of highly refined base oils have good lubrication properties, to ensure lubrication of the tool blade crumbs interface, reducing tool wear and frictional heat generation. l can be safely used for magnesium machining The product has excellent cooling properties, without the use of water-based metalworking fluid to dissipate heat generated during machining of. Because without water, so this product will not react with magnesium to produce a very dangerous hydrogen. Caltex industrial heat transfer oil Texatherm highly refined, paraffin-based heat transfer oil thermal stability. Can be used as a forced circulation of HTM closed and open heat transfer system. Features l improve the energy efficiency of the product has excellent heat transfer properties, circulation, high heat transfer efficiency. l anti-stop sediment raw cost product has a very high oxidation stability and thermal stability, sludge and coke deposits, long service life. l Start fast response of the product is good cold flow properties, Caltex hydraulic oil, started circulating rapidly. l operating pressure is low, small economic performance is good vapor pressure, high temperature less evaporation, reducing the air resistance and pump cavitation and other phenomena. So, Caltex hydraulic oil HD22, the use of this product can be normal work efficiently at a low pressure, without the use of expensive high-pressure and high-pressure heat exchanger pipes. Scope l at temperatures up to 200 ℃ open l oil heat transfer system average temperature up to 320 ℃ in closed heat transfer systems (using cold oil or an inert gas as seal) for closed heat transfer systems, in order to ensure long-term trouble-free system operation, the maximum temperature of the heater surface of the film should not exceed 340 ℃. HTM only mandatory recycling. Caltex hydraulic oil HD220 | premium hydraulic oils | Caltex hydraulic oil is supplied by Shenzhen Lubricant Co. 华盛邦. Shenzhen 华盛邦 Lubricant Co. (www.hsb-123.com/)(www.hsb-123.com) located 83 Bao Long View Road, Longhua, Shenzhen. Scraps and development in the wave of market economy, the current Huasheng Bang lubricating oil has a high profile in the lubricating oil (fat), and enjoy a good reputation. Huasheng Bang lubricants made whole network business alliance certification, marking our service and management level has reached a new height. Huasheng Bang lubricant staff willing to work with all people of insight and common development, for a better future.